Thrusters

OYS Vertical Retracting Rotating Thrusters Hydraulic


oys-vertical-retracting-rotating-thrusterVR Series vertical retracting thrusters benefit from the same in-hub technology as our T Series thrusters, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This compact design uses a lead screw lift assembly with a reduction gearbox to ensure that the thruster hub when retracted is held firmly in place. The VR Series thruster deploys vertically and can rotate 360 degrees whilst thrusting. Having steerable thrust provides ultimate manoeuvrability for berthing or in conjunction with any dynamic positioning system.

Part NumberMax Power (kW)Max Power (Hp)Thrust (Kgf)Thrust (Lbs)Prop Diameter (mm)Prop Diameter (in)
H-0250-VR253330066125510
H-0300-VR364843295230512
H-0400-VR6385756166740616
H-0500-VR991331188261950820
H-0600-VR1421911704375761024
H-0700-VR1942602328513271128
H-0800-VR2523382772611181332
H-1000-VR39352743239506101640
H-1200-VR565758621513702121948
H-1400-VR7681030844818624142256

DFA-0500-E

OYS Fixed Drive Leg
Electric


Specifications
Max Power30 kW (40 Hp)
Prop Diameter500 mm (20 in)

DFA-0575-E

OYS Fixed Drive Leg
Electric


Specifications
Max Power75 kW (101 Hp)
Prop Diameter500 mm (20 in)

DFA-0650-E

OYS Fixed Drive Leg
Electric


Specifications
Max Power150 kW (201 Hp)
Prop Diameter650 mm (26 in)

DFA-0750-E

OYS Fixed Drive Leg
Electric


Specifications
Max Power250 kW (335 Hp)
Prop Diameter750 mm (30 in)

E-0250-S

OYS Swing Thruster
Electric


Specifications
Max Power25 kW (33 Hp)
Thrust300 Kgf (661 Lbf)
Prop Diameter255 mm (10 in)

E-0250-T

Tunnel Thruster
Electric


Specifications
Max Power25 kW (33 Hp)
Thrust300 Kgf (661 Lbf)
Prop Diameter255 mm (10 in)

E-0250-V

OYS Vertical Retracting Thruster
Electric


Specifications
Max Power25 kW (33 Hp)
Thrust300 Kgf (661 Lbf)
Prop Diameter255 mm (10 in)

E-0256-VR

OYS Vertical Retracting Rotating Thruster
Electric


Specifications
Max Power25 kW (33 Hp)
Thrust300 Kgf (661 Lbf)
Prop Diameter255 mm (10 in)

E-0300-S

OYS Swing Thruster
Electric


Specifications
Max Power36 kW (48 Hp)
Thrust432 Kgf (952 Lbf)
Prop Diameter305 mm (12 in)

E-0300-T

OYS Tunnel Thruster
Electric


Specifications
Max Power36 kW (48 Hp)
Thrust432 Kgf (952 Lbf)
Prop Diameter305 mm (12 in)

E-0300-V

OYS Vertical Retracting Thruster
Electric


Specifications
Max Power36 kW (48 Hp)
Thrust432 Kgf (952 Lbf)
Prop Diameter305 mm (12 in)

E-0300-VR

OYS Vertical Retracting Rotating Thruster
Electric


Specifications
Max Power36 kW (48 Hp)
Thrust432 Kgf (952 Lbf)
Prop Diameter305 mm (12 in)

E-0400-S

OYS Swing Thruster
Electric


Specifications
Max Power63 kW (85 Hp)
Thrust756 Kgf (1667 Lbf)
Prop Diameter406 mm (16 in)

E-0400-T

OYS Tunnel Thruster
Electric


Specifications
Max Power63 kW (85 Hp)
Thrust756 Kgf (1667 Lbf)
Prop Diameter406 mm (16 in)

E-0400-V

OYS Vertical Retracting Thruster
Electric


Specifications
Max Power63 kW (85 Hp)
Thrust756 Kgf (1667 Lbf)
Prop Diameter406 mm (16 in)

E-0400-VR

OYS Vertical Retracting Rotating Thruster
Electric


Specifications
Max Power63 kW (85 Hp)
Thrust756 Kgf (1667 Lbf)
Prop Diameter406 mm (16 in)

E-0500-S

OYS Swing Thruster
Electric


Specifications
Max Power99 kW (133 Hp)
Thrust1188 Kgf (2619 Lbf)
Prop Diameter508 mm (20 in)

E-0500-T

OYS Tunnel Thruster
Electric


Specifications
Max Power99 kW (133 Hp)
Thrust1188 Kgf (2619 Lbf)
Prop Diameter508 mm (20 in)

E-0500-V

OYS Vertical Retracting Thruster
Electric


Specifications
Max Power99 kW (133 Hp)
Thrust1188 Kgf (2619 Lbf)
Prop Diameter508 mm (20 in)

E-0500-VR

OYS Vertical Retracting Rotating Thruster
Electric


Specifications
Max Power99 kW (133 Hp)
Thrust1188 Kgf (2619 Lbf)
Prop Diameter508 mm (20 in)

E-0600-S

OYS Swing Thruster
Electric


Specifications
Max Power142 kW (191 Hp)
Thrust1704 Kgf (3757 Lbf)
Prop Diameter610 mm (24 in)

E-0600-T

OYS Tunnel Thruster
Electric


Specifications
Max Power142 kW (191 Hp)
Thrust1704 Kgf (3757 Lbf)
Prop Diameter610 mm (24 in)

E-0600-V

OYS Vertical Retracting Thruster
Electric


Specifications
Max Power142 kW (191 Hp)
Thrust1704 Kgf (3757 Lbf)
Prop Diameter610 mm (24 in)

E-0600-VR

OYS Vertical Retracting Rotating Thruster
Electric


Specifications
Max Power142 kW (191 Hp)
Thrust1704 Kgf (3757 Lbf)
Prop Diameter610 mm (24 in)

E-0700-S

OYS Swing Thruster
Electric


Specifications
Max Power194 kW (260 Hp)
Thrust2328 Kgf (5132 Lbf)
Prop Diameter711 mm (28 in)

E-0700-T

OYS Tunnel Thruster
Electric


Specifications
Max Power194 kW (260 Hp)
Thrust2328 Kgf (5132 Lbf)
Prop Diameter711 mm (28 in)

E-0700-V

OYS Vertical Retracting Thruster
Electric


Specifications
Max Power194 kW (260 Hp)
Thrust2328 Kgf (5132 Lbf)
Prop Diameter711 mm (28 in)

E-0700-VR

OYS Vertical Retracting Rotating Thruster
Electric


Specifications
Max Power194 kW (260 Hp)
Thrust2328 Kgf (5132 Lbf)
Prop Diameter711 mm (28 in)

E-0800-S

OYS Swing Thruster
Electric


Specifications
Max Power252 kW (338 Hp)
Thrust2772 Kgf (6111 Lbf)
Prop Diameter813 mm (32 in)

E-0800-T

OYS Tunnel Thruster
Electric


Specifications
Max Power252 kW (338 Hp)
Thrust2772 Kgf (6111 Lbf)
Prop Diameter813 mm (32 in)

E-0800-V

OYS Vertical Retracting Thruster
Electric


Specifications
Max Power252 kW (338 Hp)
Thrust2772 Kgf (6111 Lbf)
Prop Diameter813 mm (32 in)

E-0800-VR

OYS Vertical Retracting Rotating Thruster
Electric


Specifications
Max Power252 kW (338 Hp)
Thrust2772 Kgf (6111 Lbf)
Prop Diameter813 mm (32 in)

E-0900-S

OYS Swing Thruster
Electric


Specifications
Max Power319 kW (428 Hp)
Thrust3509 Kgf (7736 Lbf)
Prop Diameter914 mm (36 in)

E-0900-T

OYS Tunnel Thruster
Electric


Specifications
Max Power319 kW (428 Hp)
Thrust3509 Kgf (7739 Lbf)
Prop Diameter914 mm (36 in)

E-0900-V

OYS Vertical Retracting Thruster
Electric


Specifications
Max Power319 kW (428 Hp)
Thrust3509 Kgf (7736 Lbf)
Prop Diameter914 mm (36 in)

E-0900-VR

OYS Vertical Retracting Rotating Thruster
Electric


Specifications
Max Power319 kW (428 Hp)
Thrust3509 Kgf (7736 Lbf)
Prop Diameter914 mm (36 in)

E-1000-S

OYS Swing Thruster
Electric


Specifications
Max Power393 kW (527 Hp)
Thrust4323 Kgf (9506 Lbf)
Prop Diameter1016 mm (40 in)

E-1000-T

OYS Tunnel Thruster
Electric


Specifications
Max Power393 kW (527 Hp)
Thrust4323 Kgf (9506 Lbf)
Prop Diameter1016 mm (40 in)

E-1000-V

OYS Vertical Retracting Thruster
Electric


Specifications
Max Power393 kW (527 Hp)
Thrust4323 Kgf (9506 Lbf)
Prop Diameter1016 mm (40 in)

E-1000-VR

OYS Vertical Retracting Rotating Thruster
Electric


Specifications
Max Power393 kW (527 Hp)
Thrust4323 Kgf (9506 Lbf)
Prop Diameter1016 mm (40 in)

E-1100-S

OYS Swing Thruster
Electric


Specifications
Max Power476 kW (638 Hp)
Thrust5236 Kgf (11543 Lbf)
Prop Diameter1118 mm (44 in)

E-1100-T

OYS Tunnel Thruster
Electric


Specifications
Max Power476 kW (638 Hp)
Thrust5236 Kgf (11543 Lbf)
Prop Diameter1118 mm (44 in)

E-1100-V

OYS Vertical Retracting Thruster
Electric


Specifications
Max Power476 kW (638 Hp)
Thrust5236 Kgf (11543 Lbf)
Prop Diameter1118 mm (44 in)

E-1100-VR

OYS Vertical Retracting Rotating Thruster
Electric


Specifications
Max Power476 kW (638 Hp)
Thrust5236 Kgf (11543 Lbf)
Prop Diameter1118 mm (44 in)

E-1200-E

OYS Swing Thruster
Electric


Specifications
Max Power565 kW (758 Hp)
Thrust6215 Kgf (13702 Lbf)
Prop Diameter1219 mm (48 in)

E-1200-T

OYS Tunnel Thruster
Electric


Specifications
Max Power565 kW (758 Hp)
Thrust6215 Kgf (13702 Lbf)
Prop Diameter1219 mm (48 in)

E-1200-V

OYS Vertical Retracting Thruster
Electric


Specifications
Max Power565 kW (758 Hp)
Thrust6215 Kgf (13702 Lbf)
Prop Diameter1219 mm (48 in)

E-1200-VR

OYS Vertical Retracting Rotating Thruster
Electric


Specifications
Max Power565 kW (758 Hp)
Thrust6215 Kgf (13702 Lbf)
Prop Diameter1219 mm (48 in)

E-1300-S

OYS Swing Thruster
Electric


Specifications
Max Power663 kW (889 Hp)
Thrust7293 Kgf (16078 Lbf)
Prop Diameter1321 mm (52 in)

E-1300-T

OYS Tunnel Thruster
Electric


Specifications
Max Power663 kW (889 Hp)
Thrust7293 Kgf (16078 Lbf)
Prop Diameter1321 mm (52 in)

E-1300-V

OYS Vertical Retracting Thruster
Electric


Specifications
Max Power663 kW (889 Hp)
Thrust7293 Kgf (16078 Lbf)
Prop Diameter1321 mm (52 in)

E-1300-VR

OYS Vertical Retracting Rotating Thruster
Electric


Specifications
Max Power663 kW (889 Hp)
Thrust7293 Kgf (16078 Lbf)
Prop Diameter1321 mm (52 in)

E-1400-S

OYS Swing Thruster
Electric


Specifications
Max Power768 kW (1030 Hp)
Thrust8448 Kgf (18624 Lbf)
Prop Diameter1422 mm (56 in)

E-1400-T

OYS Tunnel Thruster
Electric


Specifications
Max Power768 kW (1030 Hp)
Thrust8448 Kgf (18624 Lbf)
Prop Diameter1422 mm (56 in)

E-1400-V

OYS Vertical Retracting Thruster
Electric


Specifications
Max Power768 kW (1030 Hp)
Thrust8448 Kgf (18624 Lbf)
Prop Diameter1422 mm (56 in)

E-1400-VR

OYS Vertical Retracting Rotating Thruster
Electric


Specifications
Max Power768 kW (1030 Hp)
Thrust8448 Kgf (18624 Lbf)
Prop Diameter1422 mm (56 in)

H-0250-S

OYS Swing Thruster
Hydraulic

The OYS Swing Thruster benefits from the same in-hub technology as our fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. These types of thrusters are usually used in applications where they are positioned within the accommodation area of a vessel. The low profile and compact design allows them to be easily fitted below floor bearers or in low-level lockers / under beds etc.

This compact design uses a lead screw lift assembly with a reduction gear box to ensure that the thruster hub when retracted is held firmly in place and cannot move. In addition, OYS swing thrusters feature a locking pin which adds additional security when locking the leg in the raised position. The main drive motor and hydraulic hoses or cables are fully enclosed within the upper leg assembly so are not open to sea water. OYS has worked with a number of boat builders to optimise the range offered.

H-0250-S
H-0250-S
Specifications
Max Power25 kW (33 Hp)
Thrust300 Kgf (661 Lbf)
Prop Diameter255 mm (10 in)
Downloads
Swing Thrusters H-0250-S
PDF Download   DWG Download   STP Download  

H-0250-T

OYS Tunnel Thruster
Hydraulic

T Series tunnel thrusters are compact and easy to fit units that can be supplied complete with steel, aluminium or composite tunnels, pre-drilled ready for installation.

The thruster hub units are protected by twin shaft seals on each propeller shaft and a single shaft seal on the vertical input shaft. The tunnel thruster uses high torque spiral bevel gears and twin contra-rotating propellers to develop a high thrust to tunnel diameter ratio.

T Series thrusters are supplied complete with a mounting saddle, all gaskets/fasteners and a suitable interface for any hydraulic or electric motor. The motor is driven via a flexible coupling to reduce noise and vibration

H-0250-T
H-0250-T
Specifications
Max Power25 kW (33 Hp)
Thrust300 Kgf (661 Lbf)
Prop Diameter255 mm (10 in)
Downloads
Tunnel Thrusters H-0250-T
PDF Download   DWG Download   STP Download  

H-0250-V

OYS Vertical Retracting Thruster
Hydraulic

V Series vertical retracting thrusters benefit from the same in-hub technology as our T Series thrusters, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This compact design uses a lead screw lift assembly with a reduction gearbox to ensure that the thruster hub when retracted is held firmly in place.

The Vertical Thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional Tunnel Thrusters increasing the turning moment of the hull and therefore requiring less power input.

For added security, all V Series thrusters can be manually lifted in case of power failure. To ensure there is no environmental risk, the main drive motor, hydraulic hoses and electric cables are inside the vessel so are not open to seawater.

H-0250-V
H-0250-V
Specifications
Max Power25 kW (33 Hp)
Thrust300 Kgf (661 Lbf)
Prop Diameter255 mm (10 in)
Downloads
Vertical Thrusters H-0250-V
PDF Download   DWG Download   STP Download  

H-0250-VR

OYS Vertical Retracting Rotating Thruster
Hydraulic


Specifications
Max Power25 kW (33 Hp)
Thrust300 Kgf (661 Lbf)
Prop Diameter255 mm (10 in)

H-0300-S

OYS Swing Thrusters
Hydraulic

The OYS Swing Thruster benefits from the same in-hub technology as our fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. These types of thrusters are usually used in applications where they are positioned within the accommodation area of a vessel. The low profile and compact design allows them to be easily fitted below floor bearers or in low-level lockers / under beds etc.

This compact design uses a lead screw lift assembly with a reduction gear box to ensure that the thruster hub when retracted is held firmly in place and cannot move. In addition, OYS swing thrusters feature a locking pin which adds additional security when locking the leg in the raised position. The main drive motor and hydraulic hoses or cables are fully enclosed within the upper leg assembly so are not open to sea water. OYS has worked with a number of boat builders to optimise the range offered.

H-0300-S
H-0300-S
Specifications
Max Power36 kW (48 Hp)
Thrust432 Kgf (952 Lbf)
Prop Diameter305 mm (12 in)
Downloads
Swing Thrusters H-0300-S
PDF Download   DWG Download   STP Download  

H-0300-T

OYS Tunnel Thruster
Hydraulic

T Series tunnel thrusters are compact and easy to fit units that can be supplied complete with steel, aluminium or composite tunnels, pre-drilled ready for installation.

The thruster hub units are protected by twin shaft seals on each propeller shaft and a single shaft seal on the vertical input shaft. The tunnel thruster uses high torque spiral bevel gears and twin contra-rotating propellers to develop a high thrust to tunnel diameter ratio.

T Series thrusters are supplied complete with a mounting saddle, all gaskets/fasteners and a suitable interface for any hydraulic or electric motor. The motor is driven via a flexible coupling to reduce noise and vibration.

H-0300-T
H-0300-T
Specifications
Max Power36 kW (48 Hp)
Thrust432 Kgf (952 Lbf)
Prop Diameter305 mm (12 in)
Downloads
Tunnel Thrusters H-0300-T
PDF Download   DWG Download   STP Download  

H-0300-V

OYS Vertical Retracting Thruster
Hydraulic

V Series vertical retracting thrusters benefit from the same in-hub technology as our T Series thrusters, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This compact design uses a lead screw lift assembly with a reduction gearbox to ensure that the thruster hub when retracted is held firmly in place.

The Vertical Thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional Tunnel Thrusters increasing the turning moment of the hull and therefore requiring less power input.

For added security, all V Series thrusters can be manually lifted in case of power failure. To ensure there is no environmental risk, the main drive motor, hydraulic hoses and electric cables are inside the vessel so are not open to seawater.

H-0300-V
H-0300-V
Specifications
Max Power36 kW (48 Hp)
Thrust432 Kgf (952 Lbf)
Prop Diameter305 mm (12 in)
Downloads
Vertical Thrusters H-0300-V
PDF Download   DWG Download   STP Download  

H-0300-VR

OYS Vertical Retracting Rotating Thruster
Hydraulic


Specifications
Max Power36 kW (48 Hp)
Thrust432 Kgf (952 Lbf)
Prop Diameter305 mm (12 in)

H-0400-S

OYS Swing Thruster
Hydraulic

The OYS Swing Thruster benefits from the same in-hub technology as our fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. These types of thrusters are usually used in applications where they are positioned within the accommodation area of a vessel. The low profile and compact design allows them to be easily fitted below floor bearers or in low-level lockers / under beds etc.

This compact design uses a lead screw lift assembly with a reduction gear box to ensure that the thruster hub when retracted is held firmly in place and cannot move. In addition, OYS swing thrusters feature a locking pin which adds additional security when locking the leg in the raised position. The main drive motor and hydraulic hoses or cables are fully enclosed within the upper leg assembly so are not open to sea water. OYS has worked with a number of boat builders to optimise the range offered.

H-0400-S
H-0400-S
Specifications
Max Power63 kW (85 Hp)
Thrust756 Kgf (1667 Lbf)
Prop Diameter406 mm (16 in)
Downloads
Swing Thrusters H-0400-S
PDF Download   DWG Download   STP Download  

H-0400-T

OYS Tunnel Thruster
Hydraulic

T Series tunnel thrusters are compact and easy to fit units that can be supplied complete with steel, aluminium or composite tunnels, pre-drilled ready for installation.

The thruster hub units are protected by twin shaft seals on each propeller shaft and a single shaft seal on the vertical input shaft. The tunnel thruster uses high torque spiral bevel gears and twin contra-rotating propellers to develop a high thrust to tunnel diameter ratio.

T Series thrusters are supplied complete with a mounting saddle, all gaskets/fasteners and a suitable interface for any hydraulic or electric motor. The motor is driven via a flexible coupling to reduce noise and vibration.

H-0400-T
H-0400-T
Specifications
Max Power63 kW (85 Hp)
Thrust756 Kgf (1667 Lbf)
Prop Diameter406 mm (16 in)
Downloads
Tunnel Thrusters H-0400-T
PDF Download   DWG Download   STP Download  

H-0400-V

OYS Vertical Retracting Thruster
Hydraulic

V Series vertical retracting thrusters benefit from the same in-hub technology as our T Series thrusters, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This compact design uses a lead screw lift assembly with a reduction gearbox to ensure that the thruster hub when retracted is held firmly in place.

The Vertical Thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional Tunnel Thrusters increasing the turning moment of the hull and therefore requiring less power input.

For added security, all V Series thrusters can be manually lifted in case of power failure. To ensure there is no environmental risk, the main drive motor, hydraulic hoses and electric cables are inside the vessel so are not open to seawater.

H-0400-V
H-0400-V
Specifications
Max Power63 kW (85 Hp)
Thrust756 Kgf (1667 Lbf)
Prop Diameter406 mm (16 in)
Downloads
Vertical Thrusters H-0400-V
PDF Download   DWG Download   STP Download  

H-0400-VR

OYS Vertical Retracting Rotating Thruster
Hydraulic


Specifications
Max Power63 kW (85 Hp)
Thrust756 Kgf (1667 Lbf)
Prop Diameter406 mm (16 in)

H-0500-S

OYS Swing Thruster
Hydraulic

The OYS Swing Thruster benefits from the same in-hub technology as our fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. These types of thrusters are usually used in applications where they are positioned within the accommodation area of a vessel. The low profile and compact design allows them to be easily fitted below floor bearers or in low-level lockers / under beds etc.

This compact design uses a lead screw lift assembly with a reduction gear box to ensure that the thruster hub when retracted is held firmly in place and cannot move. In addition, OYS swing thrusters feature a locking pin which adds additional security when locking the leg in the raised position. The main drive motor and hydraulic hoses or cables are fully enclosed within the upper leg assembly so are not open to sea water. OYS has worked with a number of boat builders to optimise the range offered.

H-0500-S
H-0500-S
Specifications
Max Power99 kW (133 Hp)
Thrust1188 Kgf (2619 Lbf)
Prop Diameter508 mm (20 in)
Downloads
Swing Thrusters H-0500-S
PDF Download   DWG Download   STP Download  

H-0500-T

OYS Tunnel Thruster
Hydraulic

T Series tunnel thrusters are compact and easy to fit units that can be supplied complete with steel, aluminium or composite tunnels, pre-drilled ready for installation.

The thruster hub units are protected by twin shaft seals on each propeller shaft and a single shaft seal on the vertical input shaft. The tunnel thruster uses high torque spiral bevel gears and twin contra-rotating propellers to develop a high thrust to tunnel diameter ratio.

T Series thrusters are supplied complete with a mounting saddle, all gaskets/fasteners and a suitable interface for any hydraulic or electric motor. The motor is driven via a flexible coupling to reduce noise and vibration.

H-0500-T
H-0500-T
Specifications
Max Power99 kW (133 Hp)
Thrust1188 Kgf (2619 Lbf)
Prop Diameter508 mm (20 in)
Downloads
Tunnel Thrusters H-0500-T
PDF Download   DWG Download   STP Download  

H-0500-V

OYS Vertical Retracting Thruster
Hydraulic

V Series vertical retracting thrusters benefit from the same in-hub technology as our T Series thrusters, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This compact design uses a lead screw lift assembly with a reduction gearbox to ensure that the thruster hub when retracted is held firmly in place.

The Vertical Thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional Tunnel Thrusters increasing the turning moment of the hull and therefore requiring less power input.

For added security, all V Series thrusters can be manually lifted in case of power failure. To ensure there is no environmental risk, the main drive motor, hydraulic hoses and electric cables are inside the vessel so are not open to seawater.

H-0500-V
H-0500-V
Specifications
Max Power99 kW (133 Hp)
Thrust1188 Kgf (2619 Lbf)
Prop Diameter508 mm (20 in)
Downloads
Vertical Thrusters H-0500-V
PDF Download   DWG Download   STP Download  

H-0500-VR

OYS Vertical Retracting Rotating Thruster
Hydraulic


Specifications
Max Power99 kW (133 Hp)
Thrust1188 Kgf (2619 Lbf)
Prop Diameter508 mm (20 in)

H-0600-S

OYS Swing Thruster
Hydraulic

The OYS Swing Thruster benefits from the same in-hub technology as our fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. These types of thrusters are usually used in applications where they are positioned within the accommodation area of a vessel. The low profile and compact design allows them to be easily fitted below floor bearers or in low-level lockers / under beds etc.

This compact design uses a lead screw lift assembly with a reduction gear box to ensure that the thruster hub when retracted is held firmly in place and cannot move. In addition, OYS swing thrusters feature a locking pin which adds additional security when locking the leg in the raised position. The main drive motor and hydraulic hoses or cables are fully enclosed within the upper leg assembly so are not open to sea water. OYS has worked with a number of boat builders to optimise the range offered.

H-0600-S
H-0600-S, H-0500-S
Specifications
Max Power142 kW (191 Hp)
Thrust1704 Kgf (3757 Lbf)
Prop Diameter610 mm (24 in)
Downloads
Swing Thrusters H-0600-S
PDF Download   DWG Download   STP Download  

H-0600-T

OYS Tunnel Thruster
Hydraulic

T Series tunnel thrusters are compact and easy to fit units that can be supplied complete with steel, aluminium or composite tunnels, pre-drilled ready for installation.

The thruster hub units are protected by twin shaft seals on each propeller shaft and a single shaft seal on the vertical input shaft. The tunnel thruster uses high torque spiral bevel gears and twin contra-rotating propellers to develop a high thrust to tunnel diameter ratio.

T Series thrusters are supplied complete with a mounting saddle, all gaskets/fasteners and a suitable interface for any hydraulic or electric motor. The motor is driven via a flexible coupling to reduce noise and vibration.

H-0600-T
H-0600-T
Specifications
Max Power142 kW (191 Hp)
Thrust1704 Kgf (3757 Lbf)
Prop Diameter610 mm (24 in)
Downloads
Tunnel Thrusters H-0600-T
PDF Download   DWG Download   STP Download  

H-0600-V

OYS Vertical Retracting Thruster
Hydraulic

V Series vertical retracting thrusters benefit from the same in-hub technology as our T Series thrusters, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This compact design uses a lead screw lift assembly with a reduction gearbox to ensure that the thruster hub when retracted is held firmly in place.

The Vertical Thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional Tunnel Thrusters increasing the turning moment of the hull and therefore requiring less power input.

For added security, all V Series thrusters can be manually lifted in case of power failure. To ensure there is no environmental risk, the main drive motor, hydraulic hoses and electric cables are inside the vessel so are not open to seawater.

H-0600-V
H-0600-V
Specifications
Max Power142 kW (191 Hp)
Thrust1704 Kgf (3757 Lbf)
Prop Diameter610 mm (24 in)
Downloads
Vertical Thrusters H-0600-V
PDF Download   DWG Download   STP Download  

H-0600-VR

OYS Vertical Retracting Rotating Thruster
Hydraulic


Specifications
Max Power142 kW (191 Hp)
Thrust1704 Kgf (3757 Lbf)
Prop Diameter610 mm (24 in)

H-0700-S

OYS Swing Thruster
Hydraulic

The OYS Swing Thruster benefits from the same in-hub technology as our fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. These types of thrusters are usually used in applications where they are positioned within the accommodation area of a vessel. The low profile and compact design allows them to be easily fitted below floor bearers or in low-level lockers / under beds etc.

This compact design uses a lead screw lift assembly with a reduction gear box to ensure that the thruster hub when retracted is held firmly in place and cannot move. In addition, OYS swing thrusters feature a locking pin which adds additional security when locking the leg in the raised position. The main drive motor and hydraulic hoses or cables are fully enclosed within the upper leg assembly so are not open to sea water. OYS has worked with a number of boat builders to optimise the range offered.

H-0700-S
H-0700-S
Specifications
Max Power194 kW (260 Hp)
Thrust2328 Kgf (5132 Lbf)
Prop Diameter711 mm (28 in)
Downloads
Swing Thrusters H-0700-S
PDF Download   DWG Download   STP Download  

H-0700-T

OYS Tunnel Thruster
Hydraulic

T Series tunnel thrusters are compact and easy to fit units that can be supplied complete with steel, aluminium or composite tunnels, pre-drilled ready for installation.

The thruster hub units are protected by twin shaft seals on each propeller shaft and a single shaft seal on the vertical input shaft. The tunnel thruster uses high torque spiral bevel gears and twin contra-rotating propellers to develop a high thrust to tunnel diameter ratio.

T Series thrusters are supplied complete with a mounting saddle, all gaskets/fasteners and a suitable interface for any hydraulic or electric motor. The motor is driven via a flexible coupling to reduce noise and vibration.

H-0700-T
H-0700-T
Specifications
Max Power194 kW (260 Hp)
Thrust2328 Kgf (5132 Lbf)
Prop Diameter711 mm (28 in)
Downloads
Tunnel Thrusters H-0700-T
PDF Download   DWG Download   STP Download  

H-0700-V

OYS Vertical Retracting Thruster
Hydraulic

V Series vertical retracting thrusters benefit from the same in-hub technology as our T Series thrusters, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This compact design uses a lead screw lift assembly with a reduction gearbox to ensure that the thruster hub when retracted is held firmly in place.

The Vertical Thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional Tunnel Thrusters increasing the turning moment of the hull and therefore requiring less power input.

For added security, all V Series thrusters can be manually lifted in case of power failure. To ensure there is no environmental risk, the main drive motor, hydraulic hoses and electric cables are inside the vessel so are not open to seawater.

H-0700-V
H-0700-V
Specifications
Max Power194 kW (260 Hp)
Thrust2328 Kgf (5132 Lbf)
Prop Diameter711 mm (28 in)
Downloads
Vertical Thrusters H-0700-V
PDF Download   DWG Download   STP Download  

H-0700-VR

OYS Vertical Retracting Rotating Thruster
Hydraulic


Specifications
Max Power194 kW (260 Hp)
Thrust2328 Kgf (5132 Lbf)
Prop Diameter711 mm (28 in)

H-0800-S

OYS Swing Thruster
Hydraulic

The OYS Swing Thruster benefits from the same in-hub technology as our fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. These types of thrusters are usually used in applications where they are positioned within the accommodation area of a vessel. The low profile and compact design allows them to be easily fitted below floor bearers or in low-level lockers / under beds etc.

This compact design uses a lead screw lift assembly with a reduction gear box to ensure that the thruster hub when retracted is held firmly in place and cannot move. In addition, OYS swing thrusters feature a locking pin which adds additional security when locking the leg in the raised position. The main drive motor and hydraulic hoses or cables are fully enclosed within the upper leg assembly so are not open to sea water. OYS has worked with a number of boat builders to optimise the range offered.

H-0800-S
H-0800-S
Specifications
Max Power252 kW (338 Hp)
Thrust2772 Kgf (6111 Lbf)
Prop Diameter813 mm (32 in)
Downloads
Swing Thrusters H-0800-S
PDF Download   DWG Download   STP Download  

H-0800-T

OYS Tunnel Thruster
Hydraulic

T Series tunnel thrusters are compact and easy to fit units that can be supplied complete with steel, aluminium or composite tunnels, pre-drilled ready for installation.

The thruster hub units are protected by twin shaft seals on each propeller shaft and a single shaft seal on the vertical input shaft. The tunnel thruster uses high torque spiral bevel gears and twin contra-rotating propellers to develop a high thrust to tunnel diameter ratio.

T Series thrusters are supplied complete with a mounting saddle, all gaskets/fasteners and a suitable interface for any hydraulic or electric motor. The motor is driven via a flexible coupling to reduce noise and vibration.

H-0800-T

Specifications
Max Power252 kW (338 Hp)
Thrust2772 Kgf (6111 Lbf)
Prop Diameter813 mm (32 in)
Downloads
Tunnel Thrusters H-0800-T
PDF Download   DWG Download   STP Download  

H-0800-V

OYS Vertical Retracting Thrusters
Hydraulic

V Series vertical retracting thrusters benefit from the same in-hub technology as our T Series thrusters, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This compact design uses a lead screw lift assembly with a reduction gearbox to ensure that the thruster hub when retracted is held firmly in place.

The Vertical Thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional Tunnel Thrusters increasing the turning moment of the hull and therefore requiring less power input.

For added security, all V Series thrusters can be manually lifted in case of power failure. To ensure there is no environmental risk, the main drive motor, hydraulic hoses and electric cables are inside the vessel so are not open to seawater.

H-0800-V
H-0800-V
Specifications
Max Power252 kW (338 Hp)
Thrust2772 Kgf (6111 Lbf)
Prop Diameter813 mm (32 in)
Downloads
Vertical Thrusters H-0800-V
PDF Download   DWG Download   STP Download  

H-0800-VR

OYS Vertical Retracting Rotating Thruster
Hydraulic


Specifications
Max Power252 kW (338 Hp)
Thrust2772 Kgf (6111 Lbf)
Prop Diameter813 mm (32 in)

H-0900-S

OYS Swing Thruster
Hydraulic


Specifications
Max Power319 kW (428 Hp)
Thrust3509 Kgf (7736 Lbf)
Prop Diameter914 mm (36 in)

H-0900-V

OYS Vertical Retracting Thruster
Hydraulic


Specifications
Max Power319 kW (428 Hp)
Thrust3509 Kgf (7736 Lbf)
Prop Diameter914 mm (36 in)

H-0900-VR

OYS Vertical Retracting Rotating Thruster
Hydraulic


Specifications
Max Power319 kW (428 Hp)
Thrust3509 Kgf (7736 Lbf)
Prop Diameter914 mm (36 in)

H-1000-S

OYS Swing Thruster
Hydraulic

The OYS Swing Thruster benefits from the same in-hub technology as our fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. These types of thrusters are usually used in applications where they are positioned within the accommodation area of a vessel. The low profile and compact design allows them to be easily fitted below floor bearers or in low-level lockers / under beds etc.

This compact design uses a lead screw lift assembly with a reduction gear box to ensure that the thruster hub when retracted is held firmly in place and cannot move. In addition, OYS swing thrusters feature a locking pin which adds additional security when locking the leg in the raised position. The main drive motor and hydraulic hoses or cables are fully enclosed within the upper leg assembly so are not open to sea water. OYS has worked with a number of boat builders to optimise the range offered.

H-1000-S
H-1000-S
Specifications
Max Power393 kW (527 Hp)
Thrust4323 Kgf (9506 Lbf)
Prop Diameter1016 mm (40 in)
Downloads
Swing Thrusters H-1000-S
PDF Download   DWG Download   STP Download  

H-1000-T

OYS Tunnel Thruster
Hydraulic

T Series tunnel thrusters are compact and easy to fit units that can be supplied complete with steel, aluminium or composite tunnels, pre-drilled ready for installation.

The thruster hub units are protected by twin shaft seals on each propeller shaft and a single shaft seal on the vertical input shaft. The tunnel thruster uses high torque spiral bevel gears and twin contra-rotating propellers to develop a high thrust to tunnel diameter ratio.

T Series thrusters are supplied complete with a mounting saddle, all gaskets/fasteners and a suitable interface for any hydraulic or electric motor. The motor is driven via a flexible coupling to reduce noise and vibration.

H-1000-T
H-1000-T
Specifications
Max Power393 kW (527 Hp)
Thrust4323 Kgf (9506 Lbf)
Prop Diameter1016 mm (40 in)
Downloads
Tunnel Thrusters H-1000-T
PDF Download   DWG Download   STP Download  

H-1000-V

OYS Vertical Retracting Thruster
Hydraulic

V Series vertical retracting thrusters benefit from the same in-hub technology as our T Series thrusters, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This compact design uses a lead screw lift assembly with a reduction gearbox to ensure that the thruster hub when retracted is held firmly in place.

The Vertical Thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional Tunnel Thrusters increasing the turning moment of the hull and therefore requiring less power input.

For added security, all V Series thrusters can be manually lifted in case of power failure. To ensure there is no environmental risk, the main drive motor, hydraulic hoses and electric cables are inside the vessel so are not open to seawater.

H-1000-V
H-1000-V
Specifications
Max Power393 kW (527 Hp)
Thrust4323 Kgf (9506 Lbf)
Prop Diameter1016 mm (40 in)
Downloads
Vertical Thrusters H-1000-V
PDF Download   DWG Download   STP Download  

H-1000-VR

OYS Vertical Retracting Rotating Thruster
Hydraulic


Specifications
Max Power393 kW (527 Hp)
Thrust4323 Kgf (9506 Lbf)
Prop Diameter1016 mm (40 in)

H-1100-S

OYS Swing Thruster
Hydraulic


Specifications
Max Power476 kW (638 Hp)
Thrust5236 Kgf (11543 Lbf)
Prop Diameter1118 mm (44 in)

H-1100-V

OYS Vertical Retracting Thruster
Hydraulic


Specifications
Max Power476 kW (638 Hp)
Thrust5236 Kgf (11543 Lbf)
Prop Diameter1118 mm (44 in)

H-1100-VR

OYS Vertical Retracting Rotating Thruster
Hydraulic


Specifications
Max Power476 kW (638 Hp)
Thrust5236 Kgf (11543 Lbf)
Prop Diameter1118 mm (44 in)

H-1200-S

OYS Swing Thruster
Hydraulic

The OYS Swing Thruster benefits from the same in-hub technology as our fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. These types of thrusters are usually used in applications where they are positioned within the accommodation area of a vessel. The low profile and compact design allows them to be easily fitted below floor bearers or in low-level lockers / under beds etc.

This compact design uses a lead screw lift assembly with a reduction gear box to ensure that the thruster hub when retracted is held firmly in place and cannot move. In addition, OYS swing thrusters feature a locking pin which adds additional security when locking the leg in the raised position. The main drive motor and hydraulic hoses or cables are fully enclosed within the upper leg assembly so are not open to sea water. OYS has worked with a number of boat builders to optimise the range offered.

H-1200-S
H-1200-S
Specifications
Max Power565 kW (758 Hp)
Thrust6215 Kgf (13702 Lbf)
Prop Diameter1219 mm (48 in)
Downloads
Swing Thrusters H-1200-S
PDF Download   DWG Download   STP Download  

H-1200-T

OYS Tunnel Thruster
Hydraulic

T Series tunnel thrusters are compact and easy to fit units that can be supplied complete with steel, aluminium or composite tunnels, pre-drilled ready for installation.

The thruster hub units are protected by twin shaft seals on each propeller shaft and a single shaft seal on the vertical input shaft. The tunnel thruster uses high torque spiral bevel gears and twin contra-rotating propellers to develop a high thrust to tunnel diameter ratio.

T Series thrusters are supplied complete with a mounting saddle, all gaskets/fasteners and a suitable interface for any hydraulic or electric motor. The motor is driven via a flexible coupling to reduce noise and vibration.

H-1200-T
H-1200-T
Specifications
Max Power565 kW (758 Hp)
Thrust6215 Kgf (13702 Lbf)
Prop Diameter1219 mm (48 in)
Downloads
Tunnel Thrusters H-1200-T
PDF Download   DWG Download   STP Download  

H-1200-V

OYS Vertical Retracting Thruster
Hydraulic

V Series vertical retracting thrusters benefit from the same in-hub technology as our T Series thrusters, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This compact design uses a lead screw lift assembly with a reduction gearbox to ensure that the thruster hub when retracted is held firmly in place.

The Vertical Thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional Tunnel Thrusters increasing the turning moment of the hull and therefore requiring less power input.

For added security, all V Series thrusters can be manually lifted in case of power failure. To ensure there is no environmental risk, the main drive motor, hydraulic hoses and electric cables are inside the vessel so are not open to seawater.

H-1200-V
H-1200-V
Specifications
Max Power565 kW (758 Hp)
Thrust6215 Kgf (13702 Lbf)
Prop Diameter1219 mm (48 in)
Downloads
Vertical Thrusters H-1200-V
PDF Download   DWG Download   STP Download  

H-1200-VR

OYS Vertical Retracting Rotating Thruster
Hydraulic


Specifications
Max Power565 kW (758 Hp)
Thrust6215 Kgf (13702 Lbf)
Prop Diameter1219 mm (48 in)

H-1300-S

OYS Swing Thruster
Hydraulic


Specifications
Max Power663 kW (889 Hp)
Thrust7293 Kgf (16078 Lbf)
Prop Diameter1321 mm (52 in)

H-1300-V

OYS Vertical Retracting Thruster
Hydraulic


Specifications
Max Power663 kW (889 Hp)
Thrust7293 Kgf (16078 Lbf)
Prop Diameter1321 mm (52 in)

H-1300-VR

OYS Vertical Retracting Rotating Thruster
Hydraulic


Specifications
Max Power663 kW (889 Hp)
Thrust7293 Kgf (16078 Lbf)
Prop Diameter1321 mm (52 in)

H-1400-VR

OYS Vertical Retracting Rotating Thruster
Hydraulic


Specifications
Max Power768 kW (1030 Hp)
Thrust8448 Kgf (18624 Lbf)
Prop Diameter1422 mm (56 in)